NAD M23
Key Features
Purifi Eigentakt™ amplifier technology
Continuous Power Output: 2x200W into 8 ohms; 2x380W into 4 ohms
Dynamic Power Output: 2x260W into 8 ohms; 2x520W into 4 ohms
Bridged Power Output: 700W mono continuous into 8 ohms
PRODUCT DETAILS
ANALOG AUDIO INPUT/SPEAKER OUT
Input impedance (R and C)- Single-ended: 56 kohms + 200 pF Balanced: 56 kohms +200 pF
Frequency response (1W into 8 Ohms)- ±0.06dB (20-20kHz)
Rated output power into 8 Ohms and 4 ohms(Stereo mode) 80 W (ref. 20 Hz-20 kHz at rated THD, both channels driven)- >200W into 8 Ohm, >380W into 4 Ohm
Rated output power into 8 Ohms (Bridge mode, ref. 20 Hz-20 kHz at rated THD, both channels driven)- >700W into 8 Ohm
THD (20 Hz – 20 kHz)- <0.00069% (XLR), <0.0013% (RCA)
Signal-to-Noise Ratio-
>101.7 dB (1W into 8 Ohm)
>127 dB (200W into 8 Ohm)
Clipping power (Stereo mode, at 1 kHz 0.1 % THD)- >210 W (0.1 % THD 1 kHz 8 ohms)
Clipping power (Bridge mode, at 1 kHz 0.1 % THD)- > 770W
IHF dynamic power (Stereo mode, at 1 kHz)-
8 ohms: 260 W
4 ohms: 520 W
IHF dynamic power (Bridge mode, at 1 kHz)- 1017W
Peak output current- >25 A (in 1 ohm, 1 ms)
Damping factor- >800 (ref. 8 ohms, 20 Hz to 6.5 kHz)
Frequency response- ±0.06 dB (stereo), ±0.054 dB (bridged) 20 Hz -20 kHz -3 dB at 60 kHz
Channel separation-
High gain RCA: >97dB, Low gain XLR: >115dB (1kHz)
High gain RCA: >75dB, Low gain XLR: >96dB (10kHz)
Stereo Mode input sensitivity (for 200 W in 8 ohms)- Low gain: 4.5V (low gain), 2.5V (Mid gain), 1.4V (High gain)
Stereo Mode Gain- 19dB (low), 23.9dB (mid), 29.2 (high)
Bridge Mode Gain- 25.1dB (low), 30dB (mid), 35.2 (high)
Standby Power- <0.5W
DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D)- <0.5W
Net Weight- 9.7 kgs / 21.4 lbs
Shipping Weight- 17.5 kgs / 38.5 lbs
