McIntosh MAC7200
2-Channel Receiver
200 Watts x 2 channel
AM/FM Tuner
Comes with DA1 Digital Audio Module installed
Optional dealer installed upgrade to DA2 Digital Audio Module available
2-Channel Receiver
200 Watts x 2 channel
AM/FM Tuner
Comes with DA1 Digital Audio Module installed
Optional dealer installed upgrade to DA2 Digital Audio Module available
2-Channel Receiver
200 Watts x 2 channel
AM/FM Tuner
Comes with DA1 Digital Audio Module installed
Optional dealer installed upgrade to DA2 Digital Audio Module available
PRODUCT DETAILS
ELECTRONIC SPECIFICATIONS
Power Output per Channel- 200 Watts
Number of Channels- 2
Speaker Impedance- 2, 4, or 8 Ohms
Rated Power Band- 20Hz to 20kHz
Total Harmonic Distortion- 0.005%
Dynamic Headroom- 2dB
Frequency Response +0,-0.5dB- 20Hz to 20kHz
Frequency Response, +0, -3dB- 10Hz to 100kHz
Sensitivity Phono (Moving Coil)- 0.25mV
Sensitivity Phono (Moving Magnet)- 2.5mV
Sensitivity High Level (Balanced / Unbalanced)- 0.5V/0.25V
Sensitivity (Power Amp input)- 1.4V
Signal To Noise Ratio (Moving Coil)- 80dB
Signal To Noise Ratio (Moving Magnet)- 82dB
Signal To Noise Ratio (High Level)- 95dB
Signal To Noise Ratio (Power Amp input)- 113dB
Input Impedance (Balanced / Unbalanced)- 20K/20K
Damping Factor- >40
Maximum Output (Balanced / Unbalanced)- 8V Unbalanced
CONNECTIVITY
Balanced Input- 1
Unbalanced Input- 5
Phono Input Moving Coil- 1 (adjustable loading)
Phono Input Moving Magnet- 1 (fixed loading)
Upgradeable Digital Audio Module- Yes: DA1
Digital Coaxial Input- 2
Digital Optical Input- 2
Digital MCT (DIN) Input- 1
Digital USB Input- 1
Unbalanced Variable Output- 2
Headphone Output- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
AM/FM Tuner option- Included
Home Theater PassThru- Yes
Unbalanced Analog Connector Type- Standard
Speaker Binding Post Type- Standard
Service Port- 1
DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type- 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced
Digital Coaxial Input Sample Rate- 24-bit/44.1kHz to 192kHz
Digital Optical Input Sample Rate- 24-bit/44.1kHz to 192kHz
Digital MCT (DIN) Input Sample Rate-
16-bit/44.1kHz (CD)
DSD64 (SACD)
Digital USB Input Sample Rate- 32-bit/44.1kHz to 384kHz (PCM)
DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
FM GENERAL SPECIFICATIONS
FM Tuning Range-
87.9MHz - 107.9MHz (USA)
87.5MHz - 108.0MHz (Europe)
76MHz - 90MHz (Japan)
FM Channel Spacing-
200kHz (USA)
50kHz (Europe50)
100kHz (Europe100, Japan)
FM Antenna Input- 75 ohms, Type “F” Coax connector
FM ANALOG SPECIFICATIONS
Useable Sensitivity- 2.2uV (18.1dBf)
50dB Quieting Sensitivity- 1.5uV (14.8dBf)
Signal To Noise Ratio-
Mono: 70dB
Stereo: 68dB
Frequency Response- ±1dB 20Hz to 15,000Hz
Total Harmonic Distortion-
Mono: 0.4%
Stereo: 0.8%
Channel Selectivity-
60dB Adjacent Channel
66dB Alternate Channel
Stereo Separation- 38dB
AM GENERAL SPECIFICATIONS
AM Tuning Range-
530kHz - 1720kHz (USA)
522kHz - 1602kHz (Europe)
522kHz - 1611kHz (Japan)
AM Channel Spacing-
10kHz (USA)
9kHz (Europe, Japan)
AM Antenna Input- Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)
AM ANALOG SPECIFICATIONS
Selectivity- 45dB Adjacent Channel
Signal To Noise Ratio- 50dB
Frequency Response- 0dB, -6dB 50Hz to 3,000Hz
Total Harmonic Distortion- 0.5%
Sensitivity- 350uV/m
CONTROL
Tone Controls- Bass and Treble
Tone Bypass and Input Assign- Yes
RS232 Control Input- Yes
Power Control Output- 1 Main, 2 Trigger
Rear Panel Data Port- 4
Rear Panel IR Sensor Input- Yes
Input Level Match- Yes
GENERAL SPECIFICATIONS
Vacuum Tube or Solid State- Solid State
Output Type- Autoformer™
Output Meters- Yes
Dual-Layer Chassis- Yes
Chassis Finish- Black painted steel
McIntosh Monogrammed Heatsinks™- Yes
Power Requirement- 120V 50/60Hz, 4.4 amps
Standby Power Requirement- <0.25 Watts
WEIGHTS & DIMENSIONS
Dimensions (W x H x D)- 17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)
Weight- 75 lbs (34.1 kg)
Shipping Weight- 93 lbs (42.3 kg)