McIntosh MA8950

PRODUCT DETAILS

ELECTRONIC SPECIFICATIONS

Power Output per Channel- 200 Watts

Number of Channels- 2

Speaker Impedance- 2, 4, or 8 Ohms

Rated Power Band- 20Hz to 20kHz

Total Harmonic Distortion- 0.005%

Dynamic Headroom- 3.1dB

Frequency Response +0,-0.5dB- 20Hz to 20kHz

Frequency Response, +0, -3dB- 10Hz to 100kHz

Sensitivity Phono (Moving Coil)- 0.25mV

Sensitivity Phono (Moving Magnet)- 2.5mV

Sensitivity High Level (Balanced / Unbalanced)- 0.5V/0.25V

Sensitivity (Power Amp input)- 1.4V

Signal To Noise Ratio (Moving Coil)- 80dB

Signal To Noise Ratio (Moving Magnet)- 82dB

Signal To Noise Ratio (High Level)- 95dB

Signal To Noise Ratio (Power Amp input)- 113dB

Input Impedance (Balanced / Unbalanced)- 20K/20K

Damping Factor- >40

Maximum Output (Balanced / Unbalanced)- 8V Unbalanced

CONNECTIVITY

Balanced Input- 1

Unbalanced Input- 6

Phono Input Moving Coil- 1 (adjustable loading)

Phono Input Moving Magnet- 1 (fixed loading)

Upgradeable Digital Audio Module- Yes: DA2

Digital Coaxial Input- 2

Digital Optical Input- 2

Digital MCT (DIN) Input- 1

Digital USB Input- 1

HDMI (ARC) Input- 1

Unbalanced Fixed Output- 1

Unbalanced Variable Output- 2

Headphone Output- 1/4" High Drive with Headphone Crossfeed Director (HXD®)

Home Theater PassThru- Yes

Unbalanced Analog Connector Type- Standard

Speaker Binding Post Type- Standard

Service Port- 1

DIGITAL AUDIO SPECIFICATIONS

Digital-to-Analog Converter (DAC) Type- 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced

Digital Coaxial Input Sample Rate- 24-bit/44.1kHz to192kHz

Digital Optical Input Sample Rate- 24-bit/44.1kHz to192kHz

Digital MCT (DIN) Input Sample Rate-
16-bit/44.1kHz (CD)
DSD64 (SACD)

Digital USB Input Sample Rate-
32-bit/44.1kHz to 384kHz (PCM)
DSD64, DSD128, DSD256, DSD512, DXD352.8kHz, DXD384kHz

CONTROL

Tone Controls- 5-Band

Tone Bypass and Input Assign- Yes

RS232 Control Input- Yes

Power Control Output- 1 Main, 2 Trigger

Rear Panel Data Port- 4

Rear Panel IR Sensor Input- Yes

Input Level Match- Yes

GENERAL SPECIFICATIONS

Vacuum Tube or Solid State- Solid State

Output Type- Autoformer™

Output Meters- Yes

Dual Layer Chassis- Yes

Chassis Finish- Polished stainless steel & black painted steel

McIntosh Monogrammed Heatsinks™- Yes

Power Requirement- 120V 50/60Hz, 4.4 amps

Standby Power Requirement- <0.25 Watts

WEIGHTS & DIMENSIONS

Unit Dimensions (W x H x D)- 17-1/2" (44.5cm) x 7-5/8" (19.4cm) x 18-3/4" (47.6cm)

Unit Weight- 75 lbs (34.1 kg)

Shipping Weight- 93 lbs (42.3 kg)