McIntosh MA7200
2-Channel Integrated Amplifier
200 Watts x 2 channel
Comes with DA1 Digital Audio Module installed
2-Channel Integrated Amplifier
200 Watts x 2 channel
Comes with DA1 Digital Audio Module installed
2-Channel Integrated Amplifier
200 Watts x 2 channel
Comes with DA1 Digital Audio Module installed
PRODUCT DETAILS
ELECTRONIC SPECIFICATIONS
Power Output per Channel- 200 Watts
Number of Channels- 2
Speaker Impedance- 2, 4, or 8 Ohms
Rated Power Band- 20Hz to 20kHz
Total Harmonic Distortion- 0.005%
Dynamic Headroom- 2dB
Frequency Response +0,-0.5dB- 20Hz to 20kHz
Frequency Response, +0, -3dB- 10Hz to 100kHz
Sensitivity Phono (Moving Coil)- 0.25mV
Sensitivity Phono (Moving Magnet)- 2.5mV
Sensitivity High Level (Balanced / Unbalanced)- 0.5V/0.25V
Sensitivity (Power Amp input)- 1.4V
Signal To Noise Ratio (Moving Coil)- 80dB
Signal To Noise Ratio (Moving Magnet)- 82dB
Signal To Noise Ratio (High Level)- 95dB
Signal To Noise Ratio (Power Amp input)- 113dB
Input Impedance (Balanced / Unbalanced)- 20K/20K
Damping Factor- >40
Maximum Output (Balanced / Unbalanced)- 8V Unbalanced
CONNECTIVITY
Balanced Input- 1
Unbalanced Input- 5
Phono Input Moving Coil- 1 (adjustable loading)
Phono Input Moving Magnet- 1 (fixed loading)
Upgradeable Digital Audio Module- Yes: DA1
Digital Coaxial Input- 2
Digital Optical Input- 2
Digital MCT (DIN) Input- 1
Digital USB Input- 1
Unbalanced Variable Output- 2
Headphone Output- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
Home Theater PassThru- Yes
Unbalanced Analog Connector Type- Standard
Speaker Binding Post Type- Standard
Service Port- 1
DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type- 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced
Digital Coaxial Input Sample Rate- 24-bit/44.1kHz to 192kHz
Digital Optical Input Sample Rate- 24-bit/44.1kHz to 192kHz
Digital MCT (DIN) Input Sample Rate-
16-bit/44.1kHz (CD)
DSD64 (SACD)
Digital USB Input Sample Rate-
32-bit/44.1kHz to 384kHz (PCM)
DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
CONTROL
Tone Controls- Bass and Treble
Tone Bypass and Input Assign- Yes
RS232 Control Input- Yes
Power Control Output- 1 Main, 2 Trigger
Rear Panel Data Port- 4
Rear Panel IR Sensor Input- Yes
Input Level Match- Yes
GENERAL SPECIFICATIONS
Vacuum Tube or Solid State- Solid State
Output Type- Autoformer™
Output Meters- Yes
Dual-Layer Chassis- Yes
Chassis Finish- Black painted steel
McIntosh Monogrammed Heatsinks™- Yes
Power Requirement- 120V 50/60Hz, 4.4 amps
Standby Power Requirement- <0.25 Watts
WEIGHTS & DIMENSIONS
Dimensions (W x H x D)- 17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)
Weight- 75 lbs (34.1 kg)
Shipping Weight- 93 lbs (42.3 kg)