Luxman L-509X
The L-509X integrates the features of both a high quality separate amplifier and a high performance integrated amplifier into one product. The goal of creating an ideal integrated amplifier, initiated by LUXMAN with the launch of the L-509fSE in 2002, has now been advanced with the development of the L-509X.
The L-509X integrates the features of both a high quality separate amplifier and a high performance integrated amplifier into one product. The goal of creating an ideal integrated amplifier, initiated by LUXMAN with the launch of the L-509fSE in 2002, has now been advanced with the development of the L-509X.
The L-509X integrates the features of both a high quality separate amplifier and a high performance integrated amplifier into one product. The goal of creating an ideal integrated amplifier, initiated by LUXMAN with the launch of the L-509fSE in 2002, has now been advanced with the development of the L-509X.
PRODUCT DETAILS
Technical Specifications
Rated output-
120W + 120W (8Ω),
220W + 220W (4Ω)
Input sensitivity/input impedance-
PHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 1.1V/47kΩ
Output voltage- REC OUT: 180mV, PRE-OUT: 1V
Frequency response-
PHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion-
0.007% or less (8Ω, 1kHz)
0.06% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)-
PHONO (MM): 91dB or more
PHONO (MC): 75dB or more
LINE: 105dB or more
Volume adjustment- New LECUA1000
Amplification circuit- ODNF 4.0
Output configuration- Bipolar 4-parallel push-pull
Damping factor- 370
Max. amount of tone control-
BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Physical Specifications
Power supply- 230V~(50Hz) /115V~(60Hz)
Power consumption-
380W
150W (under no signal),
0.5W (at standby)
External dimensions-
440(W) x 193(H) x 463(D) mm
front side knob of 20mm
and rear side terminal of 37mm included in depth
Net weight- 29.3kg (main unit)
Accessories-
Remote control (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimension-
Width of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
