Luxman L-505Z
Designed in honor of our L-505 amplifier, which continues to fascinate many audio enthusiasts as possibly our most familiar hi-fi model and equipped with our newly developed “LIFES” amplifier feedback engine, which is at the core of LUXMAN’s contemporary designs, we would like to complete the Z series circle with the L-505Z.
Designed in honor of our L-505 amplifier, which continues to fascinate many audio enthusiasts as possibly our most familiar hi-fi model and equipped with our newly developed “LIFES” amplifier feedback engine, which is at the core of LUXMAN’s contemporary designs, we would like to complete the Z series circle with the L-505Z.
Designed in honor of our L-505 amplifier, which continues to fascinate many audio enthusiasts as possibly our most familiar hi-fi model and equipped with our newly developed “LIFES” amplifier feedback engine, which is at the core of LUXMAN’s contemporary designs, we would like to complete the Z series circle with the L-505Z.
PRODUCT DETAILS
Technical Specifications
Rated output-
100W + 100W (8Ω),
150W + 150W (4Ω)
Input sensitivity/ input impedance-
PHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN IN: 1V/47kΩ
Output voltage- PRE OUT: 1V
Frequency response-
PHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion-
0.009% or less (8Ω, 1kHz)
0.09% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)-
PHONO (MM): 87dB or more
PHONO (MC): 70dB or more
LINE: 104dB or more
Volume adjustment- LECUA
Amplification feedback circuit- LIFES 1.0
Output configuration- Bipolar parallel push-pull
Damping factor- 200
Max. amount of tone control-
BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Physical Specifications
Power supply- 230V~(50Hz) / 115V~(60Hz)
Power consumption-
330W
90W (under no signal), 0.5W (at standby)
External dimensions-
440(W) x 178(H) x 454(D) mm
front side knob of 20mm and rear side terminal
of 27mm included in depth
Net weight- 22.5kg (main unit)
Accessories-
Remote control (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimension-
Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed depending on the shape of the Y-lug terminal.
