Parasound Halo HINT 6
Features
Burr Brown analog resistor ladder volume control
An additional optical input (2 total)
Ball bearing supported solid aluminum volume knob
Increased phono stage gain for lower output cartridges
Features
Burr Brown analog resistor ladder volume control
An additional optical input (2 total)
Ball bearing supported solid aluminum volume knob
Increased phono stage gain for lower output cartridges
Features
Burr Brown analog resistor ladder volume control
An additional optical input (2 total)
Ball bearing supported solid aluminum volume knob
Increased phono stage gain for lower output cartridges
PRODUCT DETAILS
Technical Specifications
Power Output - Both channels driven-
(0.9% THD, 20 Hz - 20 kHz)
180 watts x 2 @ 8 Ω RMS
270 watts x 2 @ 4 Ω RMS
Current Capacity- 45 amps peak per channel
Frequency Response-
10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB
Total Harmonic Distortion (THD)-
< 0.01 %, average listening levels
< 0.05 %, 160 watts x 2 @ 8 Ω
Interchannel Crosstalk-
> 70 dB at 20 kHz
> 78 dB at 1 kHz
Signal to Noise Ratio - IHF A-weighted-
Line in: - 103 dB (input shorted)
Digital in: - 106 dB
Amplifier Damping Factor- > 800 at 20 Hz
Preamplifier Stage Input Sensitivity-
300 mV in for 1 V at Preamp Output jacks
Total Preamp Stage Gain: 10 dB
Max Output Unbalanced: 7 V
Max Output Balanced: 9 V
Power Amplifier Stage Sensitivity-
1 V at Bypass/Amp In for 28 V at Speaker Out
Total Amp Stage Gain: 28 dB
Phono Stage Sensitivity / Input Impedance-
MM: 41 dB / 47 k Ω
MC: 54 dB / 47 k Ω or 100 Ω
High & Low Pass Crossover Slope- 12 dB per octave
Supported DAC Sampling Rates-
USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz
Coax/Optical: up to 192 kHz / 24-bit PCM
Digital to Analog Converter-
ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit
USB 2.0 Controller- Savitech SA9227, 384 kHz / 32-bit
Headphone Amplifier-
Texas Instruments TPA6120A
Output Impedance 10 ohms
Input Impedance-
Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg
Preamplifer Output Impedance-
Unbalanced: 100 Ω
Balanced: 470 Ω per leg
Physical Specifications
Dimensions-
Width: 17-1/4" (437 mm)
Depth: 16-1/4" (413 mm)
Depth, with cables 17-1/4" (437 mm)
Height, with feet: 5-7/8" (150 mm)
Height, without feet: 5-1/4" (133 mm), 3U
Net Weight- 33 lb. (15 kg)
Shipping Weight- 45 lb. (20.4 kg)
Power Requirement-
Standby: 0.5 watts
Idling power: 70 watts
Maximum: 750 watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel