Ortofon MC Cadenza Black
DESCRIPTION
The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium.
DESCRIPTION
The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium.
DESCRIPTION
The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium.
PRODUCT DETAILS
Output voltage at 1000 Hz, 5cm/sec- 0,33 mV
Channel balance at 1 kHz- < 0,8 dB
Channel separation at 1 kHz- > 27 dB
Channel separation at 15 kHz- > 20 dB
Frequency range at - 3dB- 20 - 60.000 Hz
Frequency response 20 kHz - 20 kHz- +1,5/0
Tracking ability at 315Hz at recommended tracking force- 90 µm
Compliance, dynamic, lateral- 16 µm/mN
Stylus type- Nude Shibata on Boron cantilever
Stylus tip radius- r/R 6/50 µm
Tracking force range- 2,0-2,5 g (20-25 mN)
Tracking force, recommended- 2,3 g (23 mN)
Tracking angle- 20°
Internal impedance, DC resistance- 5 Ohm
Recommended load impedance- > 10 Ohm
Cartridge body material- Stainless steel Aluminium
Cartridge colour- Black/Black
Cartridge weight- 10,7 gram
