McIntosh MXA80

€9,764.00

2-Channel Integrated Audio System

  • 50 Watts x 2 channel

  • Speakers included

  • Supports DSD64, DSD128 & DSD256 files

Quantity:
Add To Cart

2-Channel Integrated Audio System

  • 50 Watts x 2 channel

  • Speakers included

  • Supports DSD64, DSD128 & DSD256 files

2-Channel Integrated Audio System

  • 50 Watts x 2 channel

  • Speakers included

  • Supports DSD64, DSD128 & DSD256 files

PRODUCT DETAILS

ELECTRONIC SPECIFICATIONS

Power Output per Channel- 50 Watts

Speaker Impedance- 8 Ohms

Rated Power Band- 20Hz to 20kHz

Total Harmonic Distortion- 0.005%

Intermodulation Distortion- 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz

Dynamic Headroom- 1.5dB

Frequency Response +0,-0.5dB- 20Hz to 20kHz

Frequency Response, +0, -3dB- 10Hz to 100kHz

Sensitivity (Unbalanced)- 300mV

Sensitivity (Balanced)- 600mV

Maximum Input Signal (Unbalanced)- 8V

Maximum Input Signal (Balanced)- 16V

Signal To Noise Ratio- 105dB

Input Impedance (Balanced / Unbalanced)- 25K/25K

Damping Factor- >150

Preamplifier Output- 3V (8V maximum)

Preamplifier Output Impedance- 500 Ohms

Voltage Gain- 36.5dB

Power Guard- <2% THD with up to 16dB overdrive at 1kHz

LOUDSPEAKER SPECIFICATIONS

System Driver Complement-
One 4 inch Woofer/Midrange
One 3/4 inch Dome Tweeter

Impedance- 8 Ohms Nominal

Frequency Response- 60Hz - 45kHz

Sensitivity- 80dB (2.83V/1m equivalent)

Crossover Frequency- 2,000Hz

Power Handling- 75 Watts

Enclosure Finish- High Gloss Black

Grille Finish- Black Knit Cloth

DIGITAL AUDIO SPECIFICATIONS

Digital Coaxial Input Sample Rate- 16Bit, 24Bit - 32kHz to 192kHz

Digital Optical Input Sample Rate- 16Bit, 24Bit - 32kHz to 192kHz

Digital MCT (DIN) Input Sample Rate- 16Bit, 24Bit - 32kHz to 192kHz

Digital USB Input Sample Rate- 16Bit, 24Bit, 32Bit - 32kHz to 384kHz

HEADPHONE OUTPUT SPECIFICATIONS

Headphone Power Output-
High Selection: 1W
Normal Selection: 250mW

Headphone Output Impedance-
8-40 Ohms
40-150 Ohms
150-600 Ohms

CONNECTIVITY

Headphone Output- 1 (1/4")

High-Level Inputs Unbalanced- 1 Stereo

High-Level Inputs Balanced- 1 Stereo

Digital Coaxial Input- 1

Digital Optical Input- 1

Digital MCT (DIN) Input- 1

Digital USB Input- 1

Preamplifier Output- 1 Stereo

CONTROL

Tone Controls- 5 Step Bass Boost Control: 0 to +12.5dB (in 2.5dB steps) @ 40Hz

Power Control Input- Yes

Power Control Output- Yes

GENERAL SPECIFICATIONS

Output Meters- Yes

Vacuum Tube or Solid State- Solid State

Power Requirement- 120V 50/60Hz, 1.5A

Standby Power Requirement- <0.25 Watts

Output Autoformer- Yes for Headphones

WEIGHTS & DIMENSIONS

Dimensions (W x H x D)-
Amplifier: 11-1/2" (29.2cm) x 5-7/8" (14.9cm) x 14-5/8" (37.1cm)
Speaker (each): 5" (12.7cm) x 10-3/4" (27.3cm) x 10-3/4" (27.3cm)

Weight- 50 lbs (22.6 kg)

Shipping Weight- 66 lbs (29.9 kg)

McIntosh RS150
€1,490.00
McIntosh XRT2.1K
€183,897.00
McIntosh PS2K
€60,000.00
McIntosh LCR80
€4,138.00
McIntosh XR50
€7,471.00