McIntosh MP100
2-Channel Solid State Phono Preamplifier
Moving Coil & Moving Magnet inputs
Analog outputs + USB for ripping to computer
2-Channel Solid State Phono Preamplifier
Moving Coil & Moving Magnet inputs
Analog outputs + USB for ripping to computer
2-Channel Solid State Phono Preamplifier
Moving Coil & Moving Magnet inputs
Analog outputs + USB for ripping to computer
PRODUCT DETAILS
ELECTRONIC SPECIFICATIONS
Total Harmonic Distortion- 0.005%
Frequency Response- ±0.3dB from 20Hz to 20,000Hz
Maximum Volts Out (Balanced / Unbalanced)- 16/8 V RMS
Input Impedance-
Moving Coil: 25, 50, 100, 200, 400 or 1k Ohms; 470pF
Moving Magnet: 47k Ohms; 50, 100, 150, 200, 300 or 400pF
Phono Voltage Gain-
Moving Coil: 60dB
Moving Magnet: 40dB
Signal To Noise Ratio-
Moving Coil: 78dB
Moving Magnet: 80dB
Maximum Input Signal (Moving Coil)- 8mV
Maximum Input Signal (Moving Magnet)- 80mV
Sensitivity Phono (Moving Coil)- 1mV
Sensitivity Phono (Moving Magnet)- 10mV
Rated Output-
2V Balanced
1V Unbalanced
Output Impedance-
200 Ohms Balanced
100 Ohms Unbalanced
Phono Equalization Curves- 1: RIAA
CONNECTIVITY
Phono Input Moving Coil- 1 (adjustable)
Phono Input Moving Magnet- 1 (adjustable)
Balanced Fixed Output- 1 Stereo
Unbalanced Fixed Output- 1 Stereo
Digital Coaxial Output- 1
Digital Optical Output- 1
Digital USB Audio Output- 1
Unbalanced Analog Connector Type- Standard
CONTROL
Power Control Input- 1
Power Control Output- 1
DIGITAL AUDIO SPECIFICATIONS
Digital Output Sample Rate
Optical: PCM - 24-bit/96kHz
Coaxial: PCM - 24-bit/96kHz
USB: PCM - 24-bit/96kHz
GENERAL SPECIFICATIONS
Multi-Chassis or Single- Single
Vacuum Tube or Solid State- Solid State
Power Consumption (On)- 8 Watts
WEIGHTS & DIMENSIONS
Dimensions (W x H x D)- 11.5" (29.2cm) x 3.78125" (9.6cm) x 16.75" (42.5cm)
Weight- 8.6 lbs (3.9 kg)
Shipping Weight- 9.6 lbs (4.4 kg)