Krell Solo 575 XD
DESCRIPTION
Krell iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation.
Mono block amplifier. Priced per block.
DESCRIPTION
Krell iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation.
Mono block amplifier. Priced per block.
DESCRIPTION
Krell iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation.
Mono block amplifier. Priced per block.
PRODUCT DETAILS
Technical Specifications
Frequency response-
20 Hz to 20 kHz +0, –0.15 dB
<0.5 Hz to 100 kHz +0, –3 dB
Signal-to-noise ratio-
>108 dB, wideband, unweighted, referred to full power output
>115 dB, “A”-weighted
Gain - 27 dB
Total harmonic distortion-
<0.03% at 1 kHz, at 575 W, 8 Ω
<0.19% at 20 kHz, at 575 W, 8 Ω
Input Impedance-
Single-ended: 100 kΩ
Balanced: 200 kΩ
Input sensitivity- Single-ended or balanced: 3.03 V RMS
Output power-
575 W RMS at 8 Ω
900 W RMS at 4 Ω
Output voltage-
192 V peak-to-peak
68 V RMS
Output current- 22 A peak
Slew rate- 40 V/μs
Output impedance- <0.015Ω, 20 Hz to 20 kHz
Damping factor- >530, 20 Hz to 20 kHz, referred to 8
Physical Specifications
Power consumption-
Standby: 1 W
Idle: 131 W
Maximum: 2660 W
Heat output-
Standby: 3.42 BTU/hr.
Idle: 448 BTU/hr.
Maximum: 9097 BTU/hr.
Inputs-
1 single-ended via RCA connector
1 balanced via XLR connector
1 CAST
Outputs- 1 pairs binding posts
Dimensions- 434 mm W x 194 mm H x 536mm D
Weight-
80 lbs., 36.4 kg (shipping)
70 lbs., 31.8 kg (unit only)
