E.A.T Jo N°5
DESCRIPTION
High-End E.A.T. cartridge. It comes in an unmistakable mint green colour and features a truthful and immersive sound that is pure E.A.T.
E.A.T. is very proud to announce its second cartridge creation in history, after the highly acclaimed and successful Yosegi MC. Jo No.5 is an elegant masterpiece, both sonically as well as visually.
The cartridge body and stylus guard are produced by an additive manufacturing process which is called Selective Laser Sintering (SLS). This process sinters thin layers of powder with a laser to build the final structure.
DESCRIPTION
High-End E.A.T. cartridge. It comes in an unmistakable mint green colour and features a truthful and immersive sound that is pure E.A.T.
E.A.T. is very proud to announce its second cartridge creation in history, after the highly acclaimed and successful Yosegi MC. Jo No.5 is an elegant masterpiece, both sonically as well as visually.
The cartridge body and stylus guard are produced by an additive manufacturing process which is called Selective Laser Sintering (SLS). This process sinters thin layers of powder with a laser to build the final structure.
DESCRIPTION
High-End E.A.T. cartridge. It comes in an unmistakable mint green colour and features a truthful and immersive sound that is pure E.A.T.
E.A.T. is very proud to announce its second cartridge creation in history, after the highly acclaimed and successful Yosegi MC. Jo No.5 is an elegant masterpiece, both sonically as well as visually.
The cartridge body and stylus guard are produced by an additive manufacturing process which is called Selective Laser Sintering (SLS). This process sinters thin layers of powder with a laser to build the final structure.
PRODUCT DETAILS
STYLUS TYPE- Nude Fine Line
CARTRIDGE WEIGHT- 15 g
STYLUS TIP RADIUS- 8/40 μm
FREQUENCY RESPONSE- 20 – 26.000 Hz ±1.5dB
OUTPUT VOLTAGE AT 1000 HZ- 5cm/sec. 0.33 mV
CHANNEL SEPARATION AT 1 KHZ- > 25dB
CHANNEL SEPARATION AT 15 KHZ- > 16dB
CHANNEL BALANCE AT 1KHZ- > 1.2 dB
COMPLIANCE, DYNAMIC/LATERAL- 12 μm/mN
TRACKING FORCE RANGE- 2.2-2.5 g (22-25 mN)
TRACKING FORCE RECOMMENDED- 2.4 g (24 mN)
TRACKING ABILITY AT 315 HZ- 80 μm
TRACKING ANGLE- 20°
COIL WIRE MATERIAL- Pure 4N copper
RECOMMENDED LOAD IMPEDANCE- > 20Ω
INTERNAL IMPEDANCE, DC RESISTANCE- 5Ω