Creek Audio 4040A

€899.00

The all-new 4040 A integrated amplifier has been designed to reprise the essence of the original CAS4040 which was launched in 1982 to critical acclaim. While huge technological advances and modern digital features have propelled the 4040 A into the 21st century, it continues to release the same endorphins its ancestor did 40 years ago.

Colour:
Quantity:
Add To Cart

The all-new 4040 A integrated amplifier has been designed to reprise the essence of the original CAS4040 which was launched in 1982 to critical acclaim. While huge technological advances and modern digital features have propelled the 4040 A into the 21st century, it continues to release the same endorphins its ancestor did 40 years ago.

The all-new 4040 A integrated amplifier has been designed to reprise the essence of the original CAS4040 which was launched in 1982 to critical acclaim. While huge technological advances and modern digital features have propelled the 4040 A into the 21st century, it continues to release the same endorphins its ancestor did 40 years ago.

PRODUCT DETAILS

Technical Specifications

Power output- 55 W into 8 Ohms, 110 W into 4 Ohms, both channels driven

Continuous max output current- >8A, current limited

Peak current- >20A

THD and Noise- <0.045%

Signal to Noise Ratio- 105dBA

Frequency Response- 5Hz to 50 kHz, +/-3dB / 10Hz – 20KHz +/-1dB

Input sensitivity- 525mV for 55 W into 8 Ohms

Gain- 32dB or x40

Crosstalk- >68dB at 1 kHz

Pre-Amp Inputs- 2x RCA (unbalanced) and 1x XLR (balanced)

Power-Amp Input- Power Amp Direct via a menu option

Plug-in Phono options- Sequel mk4 MM Phono. 40 and 50dB gain

Digital inputs- 1x co-axial, 1x optical, 1x USB 2.0

Wireless- Bluetooth aptX HD

Digital to Analogue Converter- ES9018k2m Sabre DAC.

Loudspeaker Outputs- 4mm binding posts with rear and side entry, plus a spade lug

Speaker output impedance- <0.02 Ohms 20Hz to 20 kHz.

Damping Factor- >100 into <0.04 Ohms

Headphone Output socket- 6.3mm stereo jack socket for 30 – 300 Ohm headphones

Physical Specifications

Mains input voltage range- 100V to 240V nominal, 50Hz or 60Hz

Power Consumption- <0.5W Standby, 5W Idle, 350W Full Power

Auto Standby- 30, 60, 120 minutes, or disabled

Finish colours- Silver or Black front panel

Weight- 2.2kgs (4.85 lbs) net, 3kgs (6.6 lbs) gross (packed)

Size W/H/D- 21.5 x 6 x 25.5 cm (8.46″ x 2.36″ x 10”) including feet, knobs, LS terminals and BT antenna.