Arcam ST60
Features
• 4 digital inputs
• Balanced XLR and Single ended RCA analogue outputs
• Optical and coaxial digital outputs
• GoogleCast, Airplay2, uPnP Streamer
• Roon Ready certified
• MQA supported
• 32-bit ESS9038K2M Sabre DAC
• Full I/P and RS232 control including Control4 and Crestron
• Total harmonic distortion + noise = 0.0008%
Features
• 4 digital inputs
• Balanced XLR and Single ended RCA analogue outputs
• Optical and coaxial digital outputs
• GoogleCast, Airplay2, uPnP Streamer
• Roon Ready certified
• MQA supported
• 32-bit ESS9038K2M Sabre DAC
• Full I/P and RS232 control including Control4 and Crestron
• Total harmonic distortion + noise = 0.0008%
Features
• 4 digital inputs
• Balanced XLR and Single ended RCA analogue outputs
• Optical and coaxial digital outputs
• GoogleCast, Airplay2, uPnP Streamer
• Roon Ready certified
• MQA supported
• 32-bit ESS9038K2M Sabre DAC
• Full I/P and RS232 control including Control4 and Crestron
• Total harmonic distortion + noise = 0.0008%
PRODUCT DETAILS
Analogue Outputs
Digital to Analogue Conversion- ESS9038 32-bit/192kHz Delta-Sigma DAC
Signal/Noise Ratio (Awtd)- 118dB unbalanced, 122db balanced
Harmonic Distortion (1kHz)- <0.0008%
Frequency response- 10Hz – 20kHz ± 0.5dB
Output Level (Fixed)- 2.2Vrms unbalanced, 4.5Vrms balanced
Output Impedance- 47Ω unbalanced, 600Ω balanced
Minimum Recommended Load- 5kΩ
RMS Jitter- < 20 psec
Digital Inputs
SPDIF Receiver- AKM4113
Supported sample rates
Optical- 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Coaxial- 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit depth 16-bit – 32-bit
Digital Interfaces
USB- USB 2.0 High Speed (480Mbps)
Ethernet- 10/100Mbps
Wireless- 802.11b/g/n
General
Mains voltage- 110–240V, 50–60Hz
Maximum power consumption- 10W
Low power standby consumption- 0.5W
Network standby consumption- 2W
Dimensions W x H x D- 433x102x306mm
Weight (net)- 5.5kg
Weight (gross)- 7.9kg
Supplied accessories Mains leads
Remote control
2 x AAA batteries
User Manual
2 x WiFi Antenna